Krone EasyCut 6210 CV - Abrasion Limit

Maintenance
75
10.13.6 Abrasion Limit
Danger! - Abrasion on the cutting discs / blade drums
Effect: Danger to life or serious injuries.
• The abrasion limit (2) will be achieved if the min. material thickness of 3 mm is no longer
given.
EC-226-0
2
2
Fig.
46
Note
If cutting discs or blade drums show deformations or wear in form of abrasions (2) or similar,
these components have to be replaced by Original Krone spare parts .