Before the Start of the New Season
91
14 Before the Start of the New Season
• Lubricate the machine thoroughly. Remove any condensation water which may have
collected in the bearings.
• Check oil level in the gearbox(es) and top up if necessary.
• Check all screws to make certain they are tight or retighten them if necessary.
• Check all electrical connection cables and the lighting. Repair or replace if necessary.
• Check the entire setting of the machine and correct if necessary.
• Re-read the operating instructions thoroughly.
Note
Use vegetable oils and greases.
• Vent the friction clutch to release the adhesion of the friction lining.
To Next Page
Loading...
