Before the Start of the New Season
100
Pos: 27.10 /BA/Ei nlagerung/Eas yCut / AM M ähwerke/Vor der Sai saon ohne B ereifung @ 3\mod _12047315332 26_78.doc @ 72767
• Lubricate the machine thoroughly. Remove any condensation water which may have
collected in the bearings.
• Check oil level in the gearbox(es) and top up if necessary.
• Check all screws to make certain they are tight or retighten them if necessary.
• Check all electrical connection cables and the lighting. Repair or replace if necessary.
• Check the entire setting of the machine and correct if necessary.
• Re-read the operating instructions thoroughly.
Note
Use vegetable oils and greases.
Pos: 27.11 /BA/Ei nlagerung/Rei bkupplung/Reib kupplung lüfte n vor der Saiso n@ 3\mod_1204731 645242_78.doc @ 72787
• Vent the friction clutch to release the adhesion of the friction lining.
Pos: 27.12 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65
To Next Page
Loading...
