EasyManua.ls Logo

Krone EasyCut 9140 CV - Hydraulic System; Filling Quantities and Lubricant Designations

Krone EasyCut 9140 CV
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Special equipment
110
Pos: 31.30 /Überschrif ten/Überschrif ten 2/F-J/Hydr aulikanlage @ 0\mod_119727 8455041_78.doc @ 16905
14.10 Hydraulic system
Pos: 31.31 /BA/Sic herheit/Hydrauli k/Arbeiten an derH ydraulikanlage @ 0\mod_11972 79394885_78.d oc @ 17063
Danger! - Caution with leaking lines
Effect: Danger to life, injuries or damage to the machine.
When searching for leaks, use suitable aids, always use suitable tools and wear
protective goggles to avoid the risk of injury!
Escaping high-pressure fluids can penetrate the skin and cause serious injury. Therefore,
you must depressurise the system before disconnecting lines.
Hydraulic oil escaping from a small opening can barely be seen. Because of this you
should use a piece of cardboard or something similar when searching for leaks. Protect
your hands and body.
If any fluid penetrates the skin, it must be removed immediately by a doctor who is
familiar with this kind of injury; serious infections could otherwise result. Physicians who
are not familiar with this area should consult appropriate information from a competent
medical source.
Check the hydraulic hose lines at regular intervals and replace them if damaged or worn!
The replacement lines must comply with the requirements of the device manufacturer.
Ensure that all line connections are tight before the pressure in the system builds up
again.
Repair work on the hydraulic system must only be performed by authorised KRONE
professional workshops.
Pos: 31.32 /Überschrif ten/Überschrif ten 3/F-J/Füll mengen und Sc hmiermittelbez eichnungen @ 3 5\mod_125 7941488816_78.d oc @ 334961
14.10.1 Filling Quantities and Lubricant Designations
Pos: 31.33 /BA/So nderausstatung /EasyCut / AM M ähwerke/Qu erförderer/Tabelle Füllmengen EC 9140C V @ 11\mo d_12235274925 86_78.doc @ 147556
Filling Quantity Filtered oils Bio-degradable lubricants
[litres] Brand name Brand name
Oil Tank
approx. 15 l
HLP 46 (ISO VG
46)
On request
Pos: 31.34 /BA/ Wartung/Zeitinter valle bei Bioöl enei nhalten @ 1 0\mod_122233 6982598_78.d oc @ 140714
Note - Observe maintenance intervals
Effect: Long expected service life of machine
With bio-degradable oils always observe the change intervals because of the ageing of
the oils.
Pos: 31.35 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65

Table of Contents

Related product manuals