Krone EasyCut 9140 CV - Introduction; Position of the Adhesive Safety Stickers on the Machine

Safety
20
Pos: 11.9 /BA/Sich erheit/EasyC ut/Sicherheit Ei nführung Eas yCut @ 3\mod_12 04553763950 _78.doc @ 70812
4.12 Introduction
The disc mower is equipped with all safety devices (protective devices). However, it is not
possible to eliminate all potential hazards on this machine as this would impair its full functional
capability. Hazard warnings are attached to the machine in the relevant areas to warn against
any dangers. The safety instructions are provided in the form of so-called warning pictograms.
Important information on the position of these safety signs and what they mean is given below!
Pos: 11.10 /BA/Sic herheit/Beschä digte oder unles bare Aufkleb er@ 0\mod_1195 567214115_78.doc @ 674
Danger! - Danger zone of the machine
Effect: Danger to life or serious injuries.
• Immediately replace damaged or illegible adhesive labels.
• Following repair work, always attach appropriate adhesive safety stickers to all the
replaced, modified or repaired components.
• Never clean areas carrying an adhesive safety label using a high-pressure cleaner.
• Familiarise yourself with the statement of the warning pictograms. The adjacent text and
the selected location on the machine provide information on the special danger spots on
the machine.
Pos: 11.11 /Überschrif ten/Überschrif ten 2/K-O/L age der Sicher heitsaufkleber a nd erM aschine @ 0\mod_11956 34967326_78.doc @ 1020
4.13 Position of the Adhesive Safety Stickers on the Machine
Pos: 11.12 /Ab kürzungen /Abkürz ungen sprac hneutral/EasyC ut/EasyCut 754 0/9140 @ 11\m od_122345315986 6_0.doc @ 146 591
(EasyCut 7540, EasyCut 9140)
Pos: 11.13 /BA/Sic herheit/Auf kleber/EasyCut/Sic herheitsaufkle ber EasyCut 754 0/9140 @ 11\m od_12232843 94660_78.doc @ 145319
GL
4
3
5
3*
EC800019
4
3
5
5
5
1
3*
4
4
5
2
5
5
5
6
Fig. 2
* = EasyCut 9140 CV only