Krone EasyCut 9140 CV - Mower Drive Gearbox

Maintenance
75
Pos: 25.27.1 /Üb erschriften/Üb erschriften 2/K-O/M äherantriebsg etriebe @ 9\ mod_122104580 0746_78.doc @ 1 31475
10.8 Mower Drive Gearbox
Pos: 25.27.2 /A bkürzungen /Abkürz ungen sprac hneutral/Eas yCut/EasyCut 7540 /9140/10000 @ 53\mod_129008 4230250_0.doc @ 509020
(EasyCut 7540, EasyCut 9140 Shift , EasyCut 10000 Shift)
Pos: 25.27.3 /B A/Wartung/Ölkontr olle_Wechsel/M ähwerke/Bild M äherantriebsg etriebe EC 280/ 320 @ 9\mod_12 21045935246 _78.doc @ 13 1519
EC-170-1
Figure 41
Pos: 25.27.4 /B A/Wartung/Ölkontr olle_Wechsel/Öl kontrolle SAE 90 @ 0\mod_11 97008973815_7 8.doc @ 15649
Oil level check:
• For time intervals, see Chapter "Oil Level Check and Oil Change Intervals (Gearboxes)".
• Unscrew the inspection screw (1)
• Oil level up to bore hole (1)
• If necessary, top up the oil (SAE 90)
• Screw the check screw (1) back in.
Pos: 25.27.5 /B A/Wartung/Ölkontr olle_Wechsel/Öl wechsel Versi on5 @ 9\mod_ 1221047052043 _78.doc @ 13 1562
Oil change:
• For time intervals, see Chapter "Oil Level Check and Oil Change Intervals (Gearboxes)".
• Screw out the oil drain plug (1)
• Collect the used oil in a suitable drip pan
• Screw in the oil drain plug (1)
• Top up the oil (2) (oil level up to hole (1))
Pos: 25.27.6 /B A/Wartung/Ölkontr olle_Wechsel/Ölq ualität /Ölme nge: siehe Ka pitel @ 0\mod_1197 007859486_7 8.doc @ 1553 1
Oil quality / oil quantity: see Chapter "Filling Quantities and Lubricant Designations for
Gearboxes"
Pos: 25.27.7 /B A/Wartung/Ölkontr olle_Wechsel/Alt öl ordnungsg emäß entsorge n @ 0\mod_11 97008117002_7 8.doc @ 15550
Note
The used oil must be disposed of correctly
Pos: 25.28 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65