Maintenance
80
Pos: 25.33.10 / BA/Wartung/Mähw erke/Messerschr aub / Messers chnellverschlus s/Messersch nellverschluss Hal tebolzen 14mm @ 0\mod_11972 68087875_78.d oc @ 16444
10.10.3 Blade Quick-Fit Device
Danger! - Insufficient thickness of material on the retaining bolts.
Effect: Danger to life or serious injuries.
• At every blade changing check the thickness of the holding bolts material.
• Damage or worn retaining bolts must always be replaced by sets on each cutting
disc/blade drum!
• The material thickness of the retaining bolts must not be less than 14 mm at the weakest
point.
• The material thickness of the leaf spring must not be less than 3 mm at the weakest
point.
EC-239-0
min. 14 mm
Fig. 45
Pos: 25.33.11 / BA/-----Seitenu mbruch------ @ 0\ mod_11961753 11226_0.doc @ 4165
To Next Page
Loading...
