Maintenance – lubrication chart
95
Pos: 25.37.5 /Üb erschriften/Üb erschriften 2/F-J/G elenkwelle @ 0\mod_1199781879 794_78.doc @ 3 4542
11.2 PTO shaft
Pos: 25.37.6 /A bkürzungen /Abkürz ungen sprac hneutral/Eas yCut/EasyCut 7540 / EasyCut 9140 Shift @ 11\mod_1 223444696991_ 0.doc @ 146394
EasyCut 7540 / EasyCut 9140 Shift
Pos: 25.37.7 /B A/Wartung/Mäh werke/EasyCut / AM Mähwerke/A bschmieren Gele nkwelle EasyCu t1 00 h @ 44\m od_127554414 1265_78.doc @ 392033
Fig. 56
Lubricate the PTO shafts at the intervals indicated in the drawing with a multi-purpose grease.
Follow the operating instructions of the PTO shaft manufacturer.
Pos: 25.37.8 /A bkürzungen /Abkürz ungen sprac hneutral/Eas yCut/EasyCut 9140 C V / EasyC ut 9140 CV Collect @ 44\mod_12755 45660375_0.d oc @ 392161
EasyCut 9140 CV / EasyCut 9140 CV Collect
Pos: 25.37.9 /B A/Wartung/Mäh werke/EasyCut / AM Mähwerke/A bschmieren Gele nkwelle EasyCu t1 00 h / 250 h @ 44\mod_12755 44870187_78.d oc @ 392086
Fig. 57
Lubricate the PTO shafts at the intervals indicated in the drawing with a multi-purpose grease.
Follow the operating instructions of the PTO shaft manufacturer.
Pos: 25.37.10 / BA/-----Seitenu mbruch------ @ 0\ mod_11961753 11226_0.doc @ 4165
To Next Page
Loading...
