KRONE ISOBUS-Terminal CCI 100
101
Setting the time control for mode 2
CC000735
1-7
2/3
5.0 s
1
5.0 s
2
CC000476
Fig. 60
1) Lifting time delay 2) Lowering time delay
As a pre-condition, mode 2 must be selected and saved.
• Press value (1) or (2) in the touch screen to change the time delay.
The input mask opens.
• Increase or reduce the value.
• Confirm the entry with “OK”.
Setting distance control for mode 3
CC000736
1-7
3/3
8.0 m
1
6.0 m
2
CC000476
Fig. 61
1) Lifting the distance 2) Lowering the distance
As a pre-condition, mode 3 must be selected and saved.
• Press value (1) or (2) in the touch screen to change the distance.
The input mask opens.
• Increase or reduce the value.
• Confirm the entry with “OK”.
Pos: 61.46.27 /Layout Module /---------------Seitenumbruch--------------- - @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
