Krone EasyCut B 1000 CV - Menu 4-6 Speed;Direction Diagnostics

KRONE ISOBUS-Terminal CCI 100
118
Pos: 61.46.43 /BA/I nfo-Center/CCI- ISOBUS-Terminal/Menü 4-6 Di agnose Fahrgeschw/Fahr trichung/Menü 4-6 D iagnose Fahrgeschwindi gkeits- /Fahrtri chtungsanzeige EasyCu t @ 94\mod_1328076250569_ 78.docx @ 795383 @ 3 @ 1
11.4.4 Menu 4-6 'Driving speed / Direction of travel indicator diagnostics'
ZX400056_1
Fig. 74
Menu 4-6 is only displayed when the tractor transmits the driving speed and the direction
of travel to the ISO bus.
Call up main menu 'Maintenance' with the
key.
• Select menu 4-6 with the
keys. The symbol is highlighted in grey.
• Call up the menu with the OK key.
The display shows menu 4-6 'Driving speed / Direction of travel indicator diagnostics'.
Explanation of symbols:
1)
<--- 0 = Driving forward
0 ---> = Reversing
2)
25.5 km/h= Speed driving forward
25.5 km/h= Reversing speed
3)
1000 RPM= PTO speed
4)
Parameter (ISO bus evaluation) selected
Parameter (ISO bus evaluation) not selected
• You can use the
ES
C
key to close the menu currently displayed.
The display shows menu level 4 'Service'.
Pos: 61.46.44 /BA/I nfo-Center/CCI- ISOBUS-Terminal/Menü 4-6 D iagnose Fahrgeschw/Fahr trichung/Hinweis Par ameter Iso-Bus Aus wertung @ 119\mod_134207 9176978_78.docx @ 1068 935 @ @ 1
Note
If the
parameter (ISO-Bus evaluation) is selected, the system activates the surface
counter and the mowing units are lifted automatically in automatic mode during reverse
travel.
Pos: 61.46.45 /Layout Module /---------------Seitenumbruch--------------- - @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1