Krone EasyCut B 1000 CV - Menu 4-7 Diagnostics Auxiliary (AUX)

KRONE ISOBUS-Terminal CCI 100
119
Pos: 61.46.46 /BA/I nfo-Center/CCI- ISOBUS-Terminal/Menü 4-7 D iagnose Auxiliary ( AUX)/Menü 4-7 Diagnose Auxi liary (AUX) T1 @ 109\mod_133 5433715718_78.doc x @ 977292 @ 3 @ 1
11.4.5 Menu 4-7 „Diagnostics Auxiliary (AUX)“
ZX400058
4-7
4-7
CC000555
Fig. 75
Calling the Menu
Main menu 4 “Serice” is called
• By pressing function key
or , select menu 4-7 , the symbol is highlighted in grey
• Press function key
The display shows menu 4-7 “Diagnostics Auxiliary (AUX)”.
Pos: 61.46.47 /BA/I nfo-Center/CCI- ISOBUS-Terminal/Menü 4-7 D iagnose Auxiliary ( AUX)/Menü 4-7 Diagnose Auxi llary Belegung am Multi funktionshebel T2 @ 109\ mod_1335435155329_78. docx @ 977400 @ @ 1
A figure of the multi-function lever appears in the display. When activating a function on the
multi-function lever, only the assigned symbol will appear in the display. The function itself is not
performed.
• Use the
ES
C
key to close the menu currently displayed
The display shows menu level 4 “Service”.
Pos: 61.46.48 /Layout Module /---------------Seitenumbruch--------------- - @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1