KRONE ISOBUS-Terminal CCI 100
130
No. Image Possible cause Remedy
20
Manual operation:
– When folding up the mowing unit
right, the width shift is smaller
than 16cm.
– Set width shift to more than
16cm.
21
Manual operation:
– The width shift is smaller than
16cm when folding in the mowing
unit.
22
22
L
– Time error, the process for
moving cross conveyor left into
the correct position takes longer
than 30 seconds.
– Perform a sensor test.
– Check hydraulic supply.
223
23
R
– Time error, the process for
moving cross conveyor right into
the correct position takes longer
than 30 seconds.
Pos: 61.46.69 /Layout Module /---------------Seitenumbruch--------------- - @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
