Krone EasyCut B 1000 CV - Detaching the Machine Safely

Operation
151
Pos: 69.34 /Überschr iften/Überschrif ten 2/A-E/Abbau der Maschi ne @ 3\mod_1204792387824_7 8.docx @ 73245 @ 2 @ 1
14.5 Detaching the machine
Pos: 69.35 /BA/Sic herheit/EasyCut/Gefa hr - Maschine abstellen_ mit Hydraulikschlauc h @ 9\mod_1220883208423_ 78.docx @ 128830 @ @ 1
Danger! - Unexpected movements of the machine
Effect: Danger to life, serious injuries
• No one is permitted inside the danger zone.
• Park the machine on a solid and even surface.
• You should not unhitch the machine until the engine has been switched off and the ignition
key has been removed.
• Secure the tractor against rolling.
• Use extreme caution when attaching implements to or detaching them from the tractor! The
accident prevention regulations must be complied with absolutely.
• When connecting the hydraulic hose to and disconnecting it from the hydraulic system of
the tractor, the tractor system as well as the machine system must be depressurised! Move
the appropriate control valves into the flow position.
• When detaching the machine, do not walk between the tractor and the machine!
Pos: 69.36 /BA/Bedienun g /EasyCut/Tripel/ Abkoppeln Bild EC B 1000 @ 100\ mod_1330442774100_78. docx @ 894509 @ @ 1
Fig. 94 Basic view of hydraulic system.
Pos: 69.37 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-Easy Cut/EasyCut B 1000/Grund bild Hydauliksyst em/Seitenmähwerke abkup peln allgemein @ 93\ mod_1327400872032_78. docx @ 788479 @ @ 1
Before you disconnect the lateral mowing units from the tractor, depressurise the hydraulic
system completely so as to avoid difficulties when reconnecting the machine to the tractor the
next time.
Pos: 69.38 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-Easy Cut/EasyCut B 1000/Grund bild Hydauliksyst emGrundbild Hydrauli ksystem Einführte xt (2014-10-07 16:46: 27) @ 118\mod_1341565010 839_78.docx @ 1025656 @ @ 1
The basic screen “Hydraulic System” does only appear if both lateral mowing units are in
working position or in transport position (locked).
Pos: 69.39 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-Easy Cut/EasyCut B 1000/Grund bild Hydauliksyst em/Aufrufen Grundbi ld Hydrauliksyste m aufrufen F9 @ 118\mod_134156465 0842_78.docx @ 1025598 @ @ 1
Displaying the basic hydraulic system dialogue
The 'Hydraulic system' basic dialogue is indicated on the terminal via the
symbol.
Pos: 69.40 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-Easy Cut/EasyCut B 1000/Grund bild Hydauliksyst emHydrauliksys tem drucklos schalten (2014- 10-07 16:48:43) @ 118\ mod_1341564357886_78. docx @ 1025569 @ @ 1
Pressing the function key for depressurises the hydraulic system.
All valves are opened for several seconds.
Pos: 69.41 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-EasyC ut/EasyCut B 1000/Anzei genbereiche Display Handbetrieb/Aufruf en der Grundbilder F9 @ 117\ mod_1341379079997_78. docx @ 1022995 @ @ 1
• Press function key basic screen ( , , , , , ) until the
desired basic screen is displayed in the terminal
Pos: 69.42 /Layout Module /---------------Seitenumbruc h---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1