Krone EasyCut B 1000 CV - Setting Pole Protection Mechanism

Settings
155
Pos: 71.13 /Überschr iften/Überschrif ten 2/A-E/Einstellung der Pfahlsicherung @ 9\ mod_1220961168693_78. docx @ 130388 @ 2 @ 1
15.3 Setting of the pole protection mechanism
Pos: 71.14 /BA/Sic herheit/EasyCut/Ac htung - Einstellung an der Pf ahlsicherung @ 9\mod_1220 960955600_78.doc x @ 130367 @ @ 1
Caution! - Adjusting the pole protection mechanism
Effect: Damage to the machine
• If the setting value is changed, the trigger moment will also change. If the spring on the
pole protection mechanism is pretensioned more than prescribed by the manufacturer,
there is a risk of damaging the disc mower.
• The spring on the pole protection mechanism must be tensioned at least to the extent that
the pole protection mechanism does not respond in transport position even with abrupt
loads.
Pos: 71.15 /BA/Einste llungen/Mähwerke/Ea syCut/Pfahlsic herung/Pfahlsic herung Bild EC B 1000 @ 100\mod_133044 4491062_78.doc x @ 894651 @ @ 1
Fig. 98
Pos: 71.16 /BA/Sic herheit/7. Gefahrenhin weise alt/Sicher heitshinweise am Anfang des Ka pitels beachten @ 101\ mod_1330611811687_7 8.docx @ 897943 @ @ 1
• Observe the safety instructions at the beginning of the section.
Pos: 71.17 /BA/Einste llungen/Mähwerke/Ea syCut/Pfahlsic herung/Pfahlsic herung allgemein @ 9\mod_122 0961293021_78.doc x @ 130429 @ @ 1
In order to protect the disc mower against damages during driving over obstacles, it is equipped
with a so-called pole protection mechanism.
The optimal setting for the trigger moment takes place in the factory.
Pos: 71.18 /BA/Einste llungen/Mähwerke/Ea syCut/Pfahlsic herung/Pfahlsicher ung EC B 1000 (CV/CR) Tabelle @ 210\ mod_1389170212709_78. docx @ 1731123 @ @ 1
Mower type Dimension x
EASYCUT B 1000 CV 85 mm
EASYCUT B 1000 CV Collect 85 mm
EASYCUT B 1000 CR 85 mm
EASYCUT B 1000 CR Collect 85 mm
Pos: 71.19 /BA/Einste llungen/Mähwerke/Ea syCut/Pfahlsic herung/Pfahlsic herung nach dem Auslösen EC 7540/91 40/ B 870 @ 11\mod_1223456 599053_78.docx @ 146901 @ @ 1
After the pole protection mechanism is triggered, the mowing unit swings back. The pole
protection mechanism will catch again as soon as you move back.
Pos: 71.20 /Layout Module /---------------Seitenumbruc h---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1