Krone EasyCut B 1000 CV - Wide Spreading with Cross Conveyor Option

Settings
162
Pos: 71.55 /Überschr iften/Überschrif ten 3/A-E/B/Brei tablage bei Option Querför derband @ 11\mod_1223457454 069_78.docx @ 146943 @ 3 @ 1
15.5.4 Wide spreading with the "Cross Conveyor" option
Pos: 71.56 /Abkürzungen / Abkürzungen sprac hneutral/EasyCut/Easy Cut B 1000 CV Colllect @ 99\ mod_1330072969727_0. docx @ 889217 @ @ 1
EasyCut B 1000 CV Collect
Pos: 71.57 /BA/Einste llungen/Mähwerke/Sc hwadbreite / Brei tablage/Einstellung Br eitablage Bild EC B 1000 CV Col lect / B 870 CV/CR Collect @ 101\ mod_1330618689606_7 8.docx @ 898057 @ @ 1
Fig. 104
Pos: 71.58 /BA/Einste llungen/Mähwerke/Sc hwadbreite / Brei tablage/Einstellung Br eitablage Text Easy Cut B 1000 CV Collect QFB @ 101\mod_133 0606533977_78.doc x @ 897345 @ @ 1
Operation without the cross conveyor
• Move the machine to the working position.
• Switch off the PTO and then the tractor engine, secure the tractor against rolling and
remove the ignition key.
• Remove the deflector plates (2) from the brackets (1) and put to one side.
• Start the tractor and raise the cross conveyor over the terminal.
• Switch off the tractor engine and remove the ignition key.
• Close the stopcock (3) on the cross conveyor.
• Open the tedder flaps (4) as far as possible.
• Mount the deflector plates and tighten the palm grips (5).
• Open the stopcock on the cross conveyor.
Pos: 71.59 /Layout Module /---------------Seitenumbruc h---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1