Special equipment
221
• Move the machine to the working position.
• Remove the deflector plate retainers and put them to one side.
• Remove the plastic covers.
• Raise the cross conveyors over the terminal.
• Switch off the PTO and then the tractor engine, secure the tractor against rolling and
remove the ignition key.
• Close the stopcock on the cross conveyor.
• Clean the locations (a to f) with the high-pressure cleaner.
• Attach the plastic covers.
• Mount the deflector plate retainers.
• Open the stopcock on the cross conveyor.
Pos: 121 /Layout Module /---------------Seitenumbruch--------------- - @ 0\mod_1196175311226_0.doc x @ 4165 @ @ 1
To Next Page
Loading...
