Krone EasyCut B 1000 CV - Lowering All Mowing Units from Headland Position to Working Position; Raising All Mowing Units from Working Position to Headland Position

KRONE ISOBUS CCI 100 Terminal / automatic mode
88
Pos: 61.43.3.16 /BA/ Info-Center/CCI -ISOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/ Grundbild Automatikb etriebGrundbild Au tomatikbetri eb Bild (2014-10-08 11:00:2 8) @ 93\mod_13274032 21807_78.docx @ 788641 @ @ 1
Fig. 50
Pos: 61.43.3.17 /BA/ Info-Center/CCI -ISOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/ Grundbild Mähwerke heb en/senkenAbsenken a ller Mähwerke von Vorgewend estellung in Arbei tsstellung abhängig vom Menü 1-7 (2014-10-07 13: 33:07) @ 180\mod_1375874387 618_78.docx @ 1541642 @ 3 @ 1
10.2.7 Lowering All Mowing Units from Headland Position to Working Position
Lowering the lateral mowing units to the front mowing unit depends on the set mode in menu 1-
7 “Setting Manual Control/Distance Control/Time Control”.
In mode 1 manual control
• Press and hold the function key for
to lower the front mowing unit.
• Release the function key for
to lower the lateral mowing units.
In mode 2 time control and mode 3 distance control
• Press and release the function key for
to lower the front mowing unit and the lateral
mowing units.
The lateral mowing units are lowered after the set time delay and the set distance have been
reached.
Note
The lateral mowing units are lowered directly into working position if there is no front mowing
unit installed.
Pos: 61.43.3.18 /BA/ Info-Center/CCI -ISOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/ Grundbild Mähwerke heb en/senkenAnheben al ler Mähwerke von Arbei tsstellung in Vorgewendes tellung abhängig vom Menü 1-7 (2014-10-07 13: 46:53) @ 180\mod_1375874566 470_78.docx @ 1541671 @ 3 @ 1
10.2.8 Raising All Mowing Units from Working Position to Headland Position
Raising the lateral mowing units to the front mowing unit depends on the set mode in menu 1-7
“Setting Manual Control/Distance Control/Time Control”.
In mode 1 manual control
• Press and hold the function key for
to raise the front mowing unit.
• Release the function key for
to raise the lateral mowing units.
In mode 2 time control and mode 3 distance control
• Press and release the function key for
to raise the front mowing unit and the lateral
mowing units.
The lateral mowing units are raised after the set time delay and the set distance have been
reached.
Note
The lateral mowing units are raised directly into headland position if there is no front mowing
unit installed.
Pos: 61.43.3.19 /Layout Module /---------------Seitenumbruch---------------- @ 0\ mod_1196175311226_0.doc x @ 4165 @ @ 1