Krone EasyCut B 1000 CV - Menu 1-3 Setting the Front Mowing Unit

KRONE ISOBUS-Terminal CCI 100
96
Pos: 61.46.18 /BA/I nfo-Center/CCI- ISOBUS-Terminal/CCI- EasyCut/EasyCut B 1000/ Hauptmenüs/Haupt menüs alte Ausführung/ Hauptmenü 1 Einstel lungen/Menü 1-3 Frontmäh werk einstellen Seite 1/ 2 @ 180\mod_1375770004690 _78.docx @ 1539906 @ 3 @ 1
11.2.3 Menu 1-3 „Setting the Front Mowing Unit“
1-3
CC000520
CC000524_1
1-3
1/3
Fig. 55
In menu level 1-3 “Setting the Front Mowing Unit”, you can select between three different
modes.
Mode 1
The front mowing unit is raised and lowered via the control unit on
tractor side.
Mode 2
The front mowing unit is raised and lowered via the terminal. The front
mowing unit is always lifted completely.
Mode 3
The front mowing unit is raised and lowered via the terminal. The lifting
process of the front mowing unit is carried out time controlled. The time
for lifting can be set.
Bringing up the Menu
Main menu 1 “Settings” is called.
• Select menu 1-3
by pressing function key or (the symbol is highlighted in
grey).
• Press function key
.
The display shows menu 1-3 “Setting the Front Mowing Unit”.
Changing and Saving Mode
The symbol
in the upper line indicates that the displayed mode is saved.
• Select the mode via function key
or , the symbol in the upper line goes out.
• Press function key
.
The set mode is saved, the symbol
appears in the upper line.
• Pressing the function key
closes the called up menu.
• Pressing the function key
and holding it down brings up the basic screen.
Pos: 61.46.19 /Layout Module /---------------Seitenumbruch--------------- - @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1