Krone EasyCut B 870 CV Collect - Adapting to the Tractor; Clutching Points

Commissioning
38
Pos: 111.11 /Übersc hriften/Überschr iften 2/A-E/Anpassung a n den Traktor @ 101\mod_133069 6961281_78.doc x @ 899639 @ 3 @ 1
7.3 Adapting to the tractor
Pos: 111.12 /BA/Sic herheit/7. Gefahrenhin weise alt/Mähwerke/W arnung - Achslasten Beei nträchtigung der Lenkf ähigkeit @ 9\mod_122 0866555985_78.doc x @ 128119 @ @ 1
Warning - Impairment of the steerability of the tractor.
Effect: Damage to the tractor or the machine.
The attachment of implements at the front and rear must not cause exceedance of the max.
permissible weight, of the permissible axle loads and of the carrying capacities of the tractor
tyres. Even with a fitted rear-mounted accessory unit, the front axle must always be loaded with
a minimum 20% service weight of the tractor.
Make sure that these prerequisites are met prior to driving.
Pos: 111.13 /Übersc hriften/Überschr iften 3/K-O/Kuppelpu nkte @ 9\mod_1220531326398_ 78.docx @ 126608 @ 3 @ 1
7.3.1 Clutching points
Pos: 111.14 /BA/Er stinbetriebnahme/Easy Cut/Kuppelpunk te/Unterlenker @ 236\mo d_1394446154303_78.doc x @ 1871601 @ @ 1
Lower links
Pos: 111.15 /BA/Er stinbetriebnahme/Easy Cut/Kuppelpunk te/Kuppelpunkte Bild EC B 870 @ 223\mod_139211086449 0_78.docx @ 1808456 @ @ 1
Kat.IIIKat.II
ECB00078
Kat.II
Kat.III
Fig. 6
Pos: 111.16 /BA/Er stinbetriebnahme/Easy Cut/Kuppelpunk te/Kuppelpunkte Text Ea syCut Kat II und III @ 223\ mod_1392124739408_78.do cx @ 1810172 @ @ 1
For EasyCut, the three-point coupling is designed for category II and III.
EasyCut is prepared as standard for category II.
• Mount ball sleeve (1) category II on lower link bolt (2).
• Secure lower link bolt with linch pin (4) and safety chain (5).
Refitting to category III:
• Pull out lower link bolt (2) and install it again rotated by 180 degrees (the longer pin must
face outwards).
• Install the ball sleeve (3) category III on the lower link bolt (2).
• Secure lower link bolt with linch pin (4) and safety chain (5).
Pos: 111.17 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1