Krone EasyCut B 870 CV Collect - Lighting; Lighting Connection

Start-up
46
Pos: 113.24 /Übersc hriften/Überschr iften 2/A-E/Beleuchtun g @ 0\mod_1195658399935_7 8.docx @ 1881 @ 2 @ 1
8.4 Lighting
Pos: 113.25 /BA/Sic herheit/Fahren und Trans port/Beleuchtung/B eleuchtungsanla ge alle Maschinen @ 7\mod_121 5519058839_78.doc x @ 103206 @ @ 1
Danger! - Lighting system
Effect: Danger to life, serious injuries or serious damage to the machine.
• Before transporting on public roads, always connect the lighting system and perform a
function check.
• Keep the lighting system clean. Soiled lights and spotlights impair road safety.
• Replace defective light bulbs or broken spotlights.
• When transporting on public highways, the machine must be in the transport position.
Pos: 113.26 /Übersc hriften/Überschr iften 2/A-E/Beleuchtun g anschließen @ 33\mod_1 254385308979_78.doc x @ 319105 @ 2 @ 1
8.5 Lighting connection
Pos: 113.27 /BA/Inbetr iebnahme/EasyCu t/Beleuchtung/Ansc hluss Beleuchtung T1 EC 7540/ 9140 @ 11\mod_122338470 0516_78.docx @ 145926 @ @ 1
To comply with the Road Traffic Licensing Regulations, the machine is equipped as follows by
default:
• 3-chamber rear lamps (3) (direction indicator: reversing light and brake light)
• with red reflectors on the rear (4)
• with lateral yellow reflectors on the rear (5)
Pos: 113.28 /BA/Inbetr iebnahme/EasyCu t/Beleuchtung/Ansc hluss Beleuchtung T2 Bi ld EC B 870 @ 225\mod_13923620704 69_78.docx @ 1819305 @ @ 1
ECB00086
2
5
4
3
1
Fig. 13
Pos: 113.29 /BA/Inbetr iebnahme/EasyCu t/Beleuchtung/Ansc hluss Beleuchtung T3 EC 2800/ 3200 3210/4013/7540/ 9140 @ 11\mod_1222421634 749_78.docx @ 141790 @ @ 1
The lighting system is connected via the 7-pin connection cable (2).
To do this:
• Insert the 7-pin connection cable plug (2) into the appropriate socket (1) of the machine.
• Insert the 7-pin connection cable plug (2) into the appropriate socket of the tractor.
• Position the cable so that it will not come in contact with the wheels.
Pos: 113.30 /BA/Inbetr iebnahme/Schwader /Hinweis Sauberkei t der Stecker und Steckdosen @ 2\mod_1202399563131_ 78.docx @ 59273 @ @ 1
Note
Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and
moisture may result in short circuits!
Pos: 113.31 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1