Operation
54
Pos: 117.23 /Übersc hriften/Überschr iften 3/U-Z/Vorgewend estellung @ 202\mod_1385 967558108_78.doc x @ 1694612 @ 3 @ 1
10.3.2 Headland Position
Pos: 117.24 /BA/Bedienu ng /EasyCut/Tripel/ Vorgewendestellu ng: Text EC B 870 @ 229\mod_13929 12040077_78.doc x @ 1837107 @ @ 1
Prerequisite:
– The mowing units are in headland position.
– The momentary toggle switch (2) is in the “down” position.
Lowering the mowing units simultaneously from headland position to working position
• Move the momentary toggle switch (3) to the “centre” position
• Activate the control unit (red 1-) until the mowing units are lowered to the working position
Raising the mowing units simultaneously from working position to headland position
• Move the momentary toggle switch (3) to the “centre” position
• Activate the control unit (red 1+) until the mowing units are raised to the headland position
Moving the right mowing unit from headland position to working position
• Move the momentary toggle switch (3) to the “left” position
• Activate the control unit (blue 2-) until the right mowing unit is lowered to the working
position
Moving the right mowing unit from working position to headland position
• Move the momentary toggle switch (3) to the “left” position
• Activate the control unit (blue 2+) until the right mowing unit is raised to the headland
position
Moving the left mowing unit from headland position to working position
• Move the momentary toggle switch (3) to the “left” position
• Activate the control unit (red -1) until the left mowing unit is lowered to the working position
Moving the left mowing unit from working position to headland position
• Move the momentary toggle switch (3) to the “left” position
• Activate the control unit (red 1+) until the left mowing unit is raised to the headland position
Pos: 117.25 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1
To Next Page
Loading...