Krone EasyCut B 870 CV Collect - Setting of the Pole Protection Mechanism

Settings
62
Pos: 119.13 /Übersc hriften/Überschr iften 2/A-E/Einstel lung der Pfahlsicherung @ 9\ mod_1220961168693 _78.docx @ 130388 @ 3 @ 1
11.3 Setting of the pole protection mechanism
Pos: 119.14 /BA/Sic herheit/EasyCut/Ac htung - Einstellung an der Pf ahlsicherung @ 9\mod_ 1220960955600_78.doc x @ 130367 @ @ 1
Caution! - Adjusting the pole protection mechanism
Effect: Damage to the machine
• If the setting value is changed, the trigger moment will also change. If the spring on the
pole protection mechanism is pretensioned more than prescribed by the manufacturer,
there is a risk of damaging the disc mower.
• The spring on the pole protection mechanism must be tensioned at least to the extent that
the pole protection mechanism does not respond in transport position even with abrupt
loads.
Pos: 119.15 /BA/Einste llungen/Mähwer ke/EasyCut/Pfahlsic herung/Pfahlsic herung Bild EC B 1000 @ 100\mod_1 330444491062_78.doc x @ 894651 @ @ 1
Fig. 28
Pos: 119.16 /BA/Sic herheit/7. Gefahrenhin weise alt/Sicher heitshinweise am Anfang de s Kapitels beachten @ 101\ mod_1330611811687_ 78.docx @ 897943 @ @ 1
• Observe the safety instructions at the beginning of the section.
Pos: 119.17 /BA/Einste llungen/Mähwer ke/EasyCut/Pfahlsic herung/Pfahlsic herung allgemein @ 9\mod_12 20961293021_78.doc x @ 130429 @ @ 1
In order to protect the disc mower against damages during driving over obstacles, it is equipped
with a so-called pole protection mechanism.
The optimal setting for the trigger moment takes place in the factory.
Pos: 119.18 /BA/Einste llungen/Mähwer ke/EasyCut/Pfahlsic herung/Pfahlsic herung EC B 870 (CV/CR) Tabel le @ 238\mod_139471955481 2_78.docx @ 1881723 @ @ 1
Mower type Dimension x
EASYCUT B 870 CV 85 mm
EASYCUT B 870 CV Collect 85 mm
EASYCUT B 870 CR 85 mm
EASYCUT B 870 CR Collect 85 mm
Pos: 119.19 /BA/Einste llungen/Mähwer ke/EasyCut/Pfahlsic herung/Pfahlsic herung nach dem Auslösen EC 754 0/9140/ B 870 @ 11\mod_122345 6599053_78.docx @ 14690 1 @ @ 1
After the pole protection mechanism is triggered, the mowing unit swings back. The pole
protection mechanism will catch again as soon as you move back.
Pos: 119.20 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1