Krone EasyCut B 870 CV Collect - Adjustment for Swathing

Settings
65
Pos: 119.33 /Übersc hriften/Überschr iften 3/A-E/E/E instellung bei Schwadablage @ 3\ mod_1204713732476_78. docx @ 72183 @ 3 @ 1
11.5.1 Adjustment for Swathing
Pos: 119.34 /Abkürzu ngen /CV-Ausführung @ 95\ mod_1328530180147_78. docx @ 799128 @ @ 1
CV-Design
Pos: 119.35 /BA/Einste llungen/Mähwer ke/Schwadbreite / Brei tablage/Einstellun g der Schwadablage Bild EC 280/320 CV / B 1000 CV @ 103\mod_133179 3832879_78.doc x @ 938098 @ @ 1
A
B
EC-371-1
Fig. 31
Pos: 119.36 /BA/Sic herheit/7. Gefahrenhin weise alt/Sicher heitshinweise am Anfang de s Kapitels beachten @ 101\ mod_1330611811687_ 78.docx @ 897943 @ @ 1
• Observe the safety instructions at the beginning of the section.
Pos: 119.37 /BA/Einste llungen/Mähwer ke/Schwadbreite / Brei tablage/Einstellun g der Schwadablage Text EC R 280/ 320 CV / B 1000 CV @ 91\mod_1326180 780237_78.docx @ 777259 @ @ 1
The swath width can be adjusted to the crop
To do this:
• Loosen the ring nut (1) (right and left machine side)
• Adjust the swath flaps (2) (ensure that right and left machine side have the same settings)
• to the outside “A” = wide swath
• to the inside “B” = close swath
• Tighten ring nut (1)
Pos: 119.38 /BA/Einste llungen/Mähwer ke/Schwadbreite / Brei tablage/Schwadklapp enverlängerung eins tellen @ 60\mod_12978534 06559_78.doc x @ 561524 @ @ 1
The swath width can also be set using the extension on the swath flaps.
To do this:
• Loosen the star knobs (1) (right and left sides of machine)
• Set swath flap extension (3)
• Tighten the star knobs (1)
Pos: 119.39 /BA/Einste llungen/Mähwer ke/Schwadbreite / Brei tablage/Hinweis Kreu zgriffe @ 59\mod_129743 1749350_78.doc x @ 558246 @ @ 1
Note
The star knobs may work loose due to vibrations, possibly resulting in the loss of the star
knobs, screws and swath plates.
• Manually tighten star knobs as tight as possible to ensure that they cannot work loose
during operation due to vibrations
Pos: 119.40 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1