EasyManua.ls Logo

Krone EasyCut F 320 - Switching Off and Detaching

Krone EasyCut F 320
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9 Driving and Transport
9.2 Switching off the machine
50 Original Operating Instructions 150000802_00_en
9.2 Switching off the machine
KMG000-083
Lift the machine into the transport position, refer to page46.
Shut down and safeguard the machine, refer to page23.
Lower the support jack (1) and secure it with the bolt, refer to page46.
Lower the machine, refer to page46.
Depressurise the tractor hydraulics.
Shut down and safeguard the machine, refer to page23.
Loosen the guard cloth (4).
Remove the supporting chain(5) from the universal shaft on the tractor side.
Remove the universal shaft (6) from the tractor side and place on the universal shaft bracket
(7).
Disconnect the hydraulic hose(2) from the tractor, attach the dust cap and place on the
machine.
Detach the top link (3).
Unlock the lower link hooks of the tractor.
Continue to lower the front lifting device until the lower link pins are free.
Carefully drive away by reversing the tractor.

Table of Contents

Related product manuals