18 Index
82 Original Operating Instructions 150000802_00_en
M
Machine Description........................................... 30
Machine overview............................................... 30
Main gearbox...................................................... 61
Maintenance - Before the beginning of the season
........................................................................... 53
Maintenance - Cutterbar..................................... 65
Maintenance - Every 10 hours, but at least once a
day...................................................................... 54
Maintenance - Every 200 hours ......................... 54
Maintenance - Every 50 hours ........................... 54
Maintenance - Gearbox...................................... 61
Maintenance - General Information.................... 53
Maintenance - Hydraulic System........................ 60
Maintenance - Lubrication .................................. 74
Maintenance - Once after 50 hours.................... 53
Maintenance and repair work ............................. 21
Maintenance table .............................................. 53
Means of representation....................................... 7
Metric thread screws with control thread............ 55
Metric thread screws with countersunk head and
hexagon socket .................................................. 56
Metric thread screws with fine thread................. 56
Mower gearbox................................................... 62
Mowing ............................................................... 47
N
Noise may damage your health.......................... 20
Notes with information and recommendations ..... 9
O
Oil change and oil level check on the cutterbar.. 63
Only perform work when the machine is at
standstill ............................................................. 21
Operation............................................................ 43
Operation is only allowed after proper start-up .. 14
Operational safety: Technically sound condition 14
P
Parking the machine safely ................................ 18
Passengers ........................................................ 14
Personal protective equipment........................... 17
Position and meaning of safety labels................ 26
Preparing front mounted mower......................... 35
Preparing machine for road travel ...................... 49
Preparing tractor................................................. 38
R
Raised machine and machine parts ................... 22
Raising machine from working position to transport
position ............................................................... 46
Re-ordering .......................................................... 6
Replacing shear protection on rotary hub .......... 66
Road safety ........................................................ 18
Rotary hub.......................................................... 65
To Next Page
Loading...
