I - 1
General
This operating manual contains basic instructions to
follow for assembly, operation and maintenance.
For this reason, these operating instructions must be
read by operating personnel before commissioning and
use, and need to be available for easy reference.
Follow both the general safety instructions contained in
the section on safety and the specific safety
instructions contained in the other sections.
1.2.3 Identification
The entire identification plate
represents a legal document and
should not be altered or rendered
illegible!
1.2.4 Data Required for Questions and
Orders
When making questions concerning the machine or
ordering replacement parts, be sure to provide type
designation, vehicle ID number and year of
manufacture.
We recommend that these details be entered in the
above boxes so that they are readily available.
Genuine replacement parts and
accessories authorized by the
manufacturer help ensure safety.
Use of other parts may void liability
for damage which results.
The machine data are listed on an identification plate
(1).
1 General
Declaration of Conformity (The requirements of EC
Machine Directive 89/392/EEC; 3. amending directive
from 22.7.93 have been fulfilled.)
See reverse side of title page
1.2.2 Certification
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Straße 10
D-48480 Spelle (Germany)
Telephone: (49) 59 77/935-0
Fax: (49) 59 77/935-339
E-mail:info.ldm@krone.de
1.2.1 Manufacturer's Address
1.2 Technical Data
The rotary tedder is used to tedding and swath cut hay.
1.1 Intended Use
KW000003
.-GermanyW
Made in
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Straße 10, D 48480 Spelle
Jahr
Année
Masch. Nr
No. de série
Type
Year
Type
Vehicle ID No.
To Next Page
Loading...