Medium Control Unit
42
Pos: 21.36 /BA/I nfo-Center/Schw ader/Bedienein heit- M edium/ Swadro 1000/Al armmeldunge n@ 2\mod_1203 324713152_7 8.docx @ 6563 1 @ 2 @ 1
6.14 Alarm Messages
If a fault occurs in the machine's electronics, it will be displayed by an appropriate flashing
signal of the LED on the key. The buzzer also sounds the same error code for 5 cycles.
Pos: 21.37 /BA/I nfo-Center/Schw ader/Bedienein heit- M edium/ Swadro 1000/B eispiel Sensorfehl er @ 2\mod _1203324866 121_78.docx @ 6 5650 @ @ 1
Example: Sensor error (11) (Error code "21")
0 1 2 3 4 5
1
0
t6 7
2 1 2 1= 21" = 21"
SW1000033
Figure 20
Temporal sequence:
Pulse duration 200 ms, pulse pause 200 ms, pause between two signal sequences 2 s, pause
between the numbers of a signal sequence 800 ms.
Pos: 21.38 /BA/--- ------ ------Seitenumbruch---- ------------ @ 0\m od_1196175311 226_0.docx @ 4 165 @ @ 1
To Next Page
Loading...
