Krone Swadro 1000 - Operation; Do Not Drive in Reverse Warning; Overload Protection

Operation
55
Pos: 27.5 /Übersc hriften/Übersc hriften 2/U-Z/Vo nTr ansport in Ar beitsstellung @ 2\mod_120 2466185276_78.d ocx @ 5966 2@ 2 @ 1
9.2 From transport into working position
Pos: 27.6 /BA/Sich erheit/Gefahr enhinweise/Sc hwader/Gefahr M aschine absen ken @ 5\mod_1 21369480507 8_78.docx @ 8 8774 @ @ 1
Danger! – Lowering the machine into working position
Danger to life, injuries or damage to the machine.
• Lower the machine only when you are absolutely sure that neither persons, animals nor
objects are in the swivel range of the machine.
• Switch the PTO on only when the machine is in working position, the collapsible tine
arms are swivelled into the working position and the hoop guards are turned downwards.
Pos: 27.7 /BA/Bedi enung /Schw ader/Zinken / Zi nkenarme/Zin kenschutze entfern en SW 807/ 810/907 @ 2\m od_12024670388 39_78.docx @ 59738 @ 2 @ 1
9.3 Removing the tine protections from the tine tips
SW9070021
2
1
Figure 29
• Remove the tine protections (1).
• Insert the tine protections into the support (2) (right and left side of the machine) and and
secure with the linch pin.
Pos: 27.8 /BA/Bedi enung /Schw ader/Kreiselar mes enken/heb en/Kreiselarme se nken SW 100 0 @ 2\mod_12 02970419390 _78.docx @ 63316 @ 2 @ 1
9.4 Lower rotor arms to working position
SW1000008
• Pressurise the hydraulic system.
• Turn on Control Unit.
• Lower rotor (see Chapter on Control Unit Medium "Lowering rotors in headland position /
Lowering all rotors in working position).
Pos: 27.9 /BA/---- ------- ----Seitenumbruch----- ----------- @ 0\mo d_11961753112 26_0.docx @ 41 65 @ @ 1