Krone Swadro 1000 - Settings; Adjust Rotor Running Gear

Settings
67
Pos: 32.1 /Übersc hriften/Übersc hriften 3/K-O/O ptional @ 77\mo d_131004300 4600_78.docx @ 667155 @ 3 @ 1
10.1.1 Optional
Pos: 32.2 /BA/Eins tellungen/Sch wader/Kreiselfahr werk/Kreisel fahrwerk Bild Sw adro 1000 6 R ad @ 78\mod_ 13142545577 17_78.docx @ 69 5763 @ @ 1
I
II
III
Fig. 40
Pos: 32.3 /BA/Eins tellungen/Sch wader/Kreiselfahr werk/Kreisel fahrwerk Text allgemein @ 2\ mod_120288226 6696_78.docx @ 6 2162 @ @ 1
The transverse inclination (in direction of travel) and the longitudinal inclination (rotor tip
forwards) of the rotors can be adjusted at the rear guide wheels of the right and left running
gear.
Pos: 32.4 /BA/Eins tellungen/Sch wader/Kreiselfahr werk/Kreisel fahrwerk Quer neigung @ 2\ mod_1202883118 852_78.docx @ 6 2181 @ @ 1
Transverse inclination:
In order to achieve an optimal operating result, the transverse inclination (in direction of travel)
for the right and left rotors can be adjusted individually at the rear guide wheels of the relevant
running gear (left + right).
Pos: 32.5 /BA/Eins tellungen/Sch wader/Kreiselfahr werk/Quern eigungM ittelsch wad neu S wadro 1000 @ 22\ mod_123986656 6269_78.doc x@ 2 34507 @ @ 1
With centre swathing, the right guide wheel must be positioned lower than the left guide wheel
relative to the rotor running gear.
Pos: 32.6 /BA/Eins tellungen/Sch wader/Kreiselfahr werk/Kreisel fahrwerk Vorgeh ensweise Sw adro 807_810 @ 2\ mod_1202 883960133_78.doc x @ 62219 @ @ 1
Do not walk under the raised rotors.
• Raise the rotor arms only far enough to be able to perform the switching task.
• Remove the rear guide wheels and reinstall them in the desired position.
Pos: 32.7 /BA/Eins tellungen/Sch wader/Kreiselfahr werk/Kreisel fahrwerk Längs neigung Swadro 8 07/810 @ 2\ mod_1202883301 211_78.doc x @ 62200 @ @ 1
Longitudinal inclination:
The longitudinal inclination can be changed (rotor tips forward) by reconnecting the rear guide
wheels (right and left) of the running gear in positions (I,II,III).
Pos. I= least tipping effect
Pos. III= most tipping effect
Pos: 32.8 /BA/Eins tellungen/Sch wader/Kreiselfahr werk/Kreisel fahrwerk Vorgeh ensweise Sw adro 807_810 @ 2\ mod_1202 883960133_78.doc x @ 62219 @ @ 1
Do not walk under the raised rotors.
• Raise the rotor arms only far enough to be able to perform the switching task.
• Remove the rear guide wheels and reinstall them in the desired position.
Pos: 33 /BA/----- ---------- Seitenumbruch------ ---------- @ 0\mod_1 19617531122 6_0.docx @ 41 65@ @ 1