Maintenance – lubrication chart
91
Pos: 42.39.1 /Üb erschriften/Üb erschriften 1/U-Z/ Wartung - Sc hmierplan @ 0\ mod_1197359 304198_78.docx @ 18232 @ 1@ 1
13 Maintenance – lubrication chart
Pos: 42.39.2 /Üb erschriften/Üb erschriften 2/P-T/S pezielle Sich erheitshinweis e@ 0 \mod_1196 660495760_7 8.docx @ 9134 @ 2 @ 1
13.1 Special Safety Instructions
Pos: 42.39.3 /B A/Sicherheit/Gefa hrenhinweise/L adewagen/Ge fahr Wartung allge mein @ 0\mo d_119988406 9862_78.docx @ 36704 @ @ 1
Danger! - When performing repair, maintenance or cleaning work on the machine, or in
the case of technical intervention, drive elements may start moving.
Effect: Danger to life, injuries or damage to the machine.
• Switch off the tractor engine and remove the ignition key
• Secure the machine and tractor against the possibility of rolling back.
• Switch off the PTO and disengage it
• After the repair, maintenance and cleaning work or technical interventions are completed,
mount all protective coverings and safety devices properly again.
• Avoid skin contact with oils, greases, cleaning agents and solvents.
• In the event of injuries or burns due to oils, cleaning agents or solvents, contact a
physician immediately.
• All other safety instructions must also be followed to avoid injuries and accidents.
Pos: 42.39.4 /Üb erschriften/Üb erschriften 2/F-J/G elenkwelle @ 0\mod_11997 81879794_78.d ocx @ 34542 @ 2 @ 1
13.2 PTO shaft
Pos: 42.39.5 /B A/Wartung/Gelen kwelle schmiere n/Abschmiere n Gelenkwelle S chwader @ 2\ mod_1202798437 998_78.doc x @ 61395 @ @ 1
Figure 55
Lubricate the PTO shafts at the intervals indicated in the drawing with a multi-purpose grease.
Follow the operating instructions of the PTO shaft manufacturer.
Pos: 42.39.6 /B A/-------- -------Seitenumbruch--- --------- ---- @0\ mod_11961753 11226_0.docx @ 4165 @ @ 1