Krone Swadro 1000 - Lowering Rotors from Headland to Working Position

Medium Control Unit
36
Pos: 21.22 /BA/Inf o-Center/Schwader/Bedi eneinheit - Mediu m/Swadro 1000/Absenken a ller Kreisel in die Arbei tsstellung @ 2\mod_12033 19045902_78.doc x @ 65476 @ 23 @ 1
6.8 Lowering the Rotors from Headland to Working Position.
6.8.1 Lowering All Rotors to Working Position
SW1000030
Figure 14
Note
Only possible in headland position! The function will not be performed if a rotor is in transport
position.
By pressing the key you can automatically lower the front rotors, which are currently in
headland position, to working position.
Pos: 21.23 /BA/Inf o-Center/Schwader/Bedi eneinheit - Mediu m/Swadro 1000/Absenken einz elner Kreisel in die A rbeitsstellung @ 2\mod_ 1203318076668_78. docx @ 65457 @ 3 @ 1
6.8.2 Lowering individual rotors to working position (optional)
• Select the rotors to be lowered with keys 4,5.
• Pressing the
key lowers the selected rotors.
Pos: 21.24 /BA/--- ------------ Seitenumbruch------ ---------- @ 0\mod_119617 5311226_0.doc x @ 4165 @ @ 1