90
A
Adjustable throttles .............................................64
Adjusting the lower suspension arms.................28
Adjusting the raking height mechanically ...........49
Adjusting the Rear Swath Cloth..........................41
Affixing the Adhesive Safety and Information
Labels .............................................................15
At the End of the Harvest Season ......................85
B
Before the Start of the New Season...................86
C
Chain for height restriction of suspension arms .83
Checking and maintaining tyres .........................68
Commissioning ...................................................27
Compensation Spring(s).....................................65
Connecting the electrical controls.......................35
Connecting the hydraulic lines............................33
Contact................................................................15
D
Dangers in Case of Non-compliance with the
Safety Instructions ..........................................20
Driving and Transport .........................................37
F
Filling Quantities and Lubrication Designations for
Gearboxes ......................................................80
First installation...................................................27
From transport into working position ..................40
H
Height of tractor lower suspension arms ............30
Hitched Implements............................................22
Hydraulic system ................................................24
Hydraulics ...........................................................32
I
Identification Plate ................................................7
Identifying Symbols in the Operating Instructions
........................................................................19
Inadmissible Modes of Operation.......................26
Information Required for Questions and Orders.. 8
Install the PTO shaft .......................................... 36
Intended Use........................................................ 9
Introduction .......................................................... 7
L
Lighting connection............................................ 34
Lowering the rotor arms into working position ... 40
Lubrication Chart................................................ 77
M
Maintenance ................................................ 25, 65
Maintenance - hydraulic system ........................ 79
Maintenance – lubrication chart................... 74, 76
Malfunctions - Causes and Remedies............... 87
Mounting onto the Tractor.................................. 31
Move the hoop guards to the working position.. 48
Move the hoop guards to transport position. ..... 53
O
Operation ........................................................... 39
Overload protection............................................ 39
P
Parking............................................................... 61
Personnel Qualification and Training................. 20
Placing in Storage.............................................. 84
Position of the Adhesive Safety Stickers on the
Machine ......................................................... 16
Position of the General Information Labels on the
Machine ......................................................... 18
PTO operation.................................................... 23
PTO shaft..................................................... 29, 75
Purpose of Use .................................................... 7
R
Regulating direction of travel ............................. 63
Removing the tine protections from the tine tips 40
Re-Ordering the Adhesive Safety and Information
Labels ............................................................ 15
Replacing the tine arms(in case of repair)... 70, 72
To Next Page
Loading...
