Placing in Storage
101
18.2 Before the Start of the New Season
• Lubricate the machine thoroughly. Remove any condensation water which may have
collected in the bearings.
• Check oil level in the gearbox(es) and top up if necessary.
• Check hydraulic hoses and lines for leaks and replace them where necessary.
• Check the air pressure in the tyres and refill if necessary.
• Check all screws to make certain they are tight or retighten them if necessary.
• Check all electrical connection cables and the lighting. Repair or replace it if necessary.
• Check all settings on the machine and correct if necessary.
• Re-read the operating instructions thoroughly.
Note
Use vegetable oils and greases.