Krone Swadro TC 640 - EC Declaration of Conformity

Table of Contents
2
CV0
CV0
EC Declaration of Conformity
We
Maschinenfabrik Krone Beteiligungs-GmbH
Heinrich-Krone-Str. 10, D-48480 Spelle
hereby declare as manufacturer of the product named below, on our sole responsibility,
that the
Machine: Rotor Rake
Type: Swadro TC 640
to which this declaration refers is in compliance with the following relevant provisions of:
• EC Directive 2006/42/EC (machines).
The undersigned Managing Director is authorised to compile the technical documents.
Spelle, 01.08.2017
Dr.-Ing. Josef Horstmann
(Managing Director, Design & Development)
Year of manufacture:
Machine no.: