Commissioning
40
7 Commissioning
WARNING
Risk of injury or damage to the machine due to faulty initial operation
If the initial operation is carried out incorrectly or incompletely, the machine may present
defects. As a result, people may be injured or killed or the machine may be damaged.
• Initial operation must only be carried out by authorised technicians.
• Read in full and follow the “Personnel qualification of the technicians”, see chapter “Basic
safety instructions”.
WARNING!
If the basic safety instructions are not followed, people may be seriously injured or
killed.
• To avoid accidents, the basic safety instructions in the chapter Safety must have been
read and followed, see chapter Safety "Basic safety instructions".
WARNING!
If the safety routines are not adhered to, people may be seriously injured or killed.
• To avoid accidents, the safety routines in the chapter Safety must be read and followed,
see chapter Safety "Safety routines".
WARNING!
Risk of injury due to the unsecured machine rolling away!
If the machine is not secured against rolling away when it has been switched off, there is a risk
of people being injured by the machine rolling away in an uncontrolled manner.
• Secure the machine against rolling away with wheel chocks.
Note
Before placing the machine in operation for the first time, the oil level must be checked in all
gearboxes.
7.1 First installation
The document "Assembly Instructions" describes how to install the device for the first time.
To Next Page
Loading...
