Krone Swadro TC 640 - Swivel Tine Arms to Working Position

Operation
57
9.4 Swivel tine arms to working position.
• Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting
down and safeguarding the machine".
9.4.1 With rigid tine arms design
SW9070082
1
2
3
3
1
Fig.
26
• Lower outrigger arms into working position.
• Switch off tractor and secure it against rolling away.
• Loosen the tension spring (1) from the tine (2) (also loosen rotor locking device, if
necessary) and hinge it in the fastening hole (3).