Krone Swadro TC 880 - For Design with Hydraulic Single-Rotor Lifting Mechanism

Operation
63
11.2.2 For design with hydraulic single-rotor lifting mechanism
4
SW9000036_1
Fig. 31
• Turn on the tractor.
• Set the switching valve (3) to central position (II).
• Raise the rotor arms with the double-action control unit until the indicator arrow (4) is in the
centre between 7.8.
• Lower the rotors to working position by using the single-action control unit until the wheels
of the rotor running gear are on the ground.