EasyManuals Logo

Krups KM785D50 User Manual

Krups KM785D50
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
6
Set the coffee strength. The coffee strength selector (7) is used for setting the required
coffee strength. The coffee strength selector (7) can be set to mild coffee (MILD), medium
coffee (MEDIUM) and strong coffee (STRONG) Fig. 14.
Place the glass carafe (17) on the heating plate (18) Fig. 16.
Press Grind and Brew button (1). The cup-of-coffee symbol (E) appears (Keep warm
function) Fig. 15.
After a few seconds, the appliance starts grinding the coffee beans and making the coffee.
To interrupt the process, press the Grind and Brew button (1).
If the process is completed, the appliance will beep and switch to keep-warm mode.
The cup-of-coffee symbol (E) starts ashing. The appliance can be switched off by
pressing the Grind and Brew button (1) or the appliance switches off automatically after
2 hours.
Making coffee with ground coffee
Before you proceed, we would like you to focus your attention on the following notes:
Only use ground coffee.
Only use paper coffee lters or the permanent lter.
Fill the water reservoir (15) with the required amount of water.
Do not ll the water reservoir with more water than required for making the coffee.
Press the Release button (12) to open the lter holder Fig. 6.
Place a suitable paper lter or permanent lter in the coffee lter holder (10) Fig.7a or 7b.
Note: The appliance can only be used when the display is activated. If the display is not
activated, press any button to activate the display. The appliance is ready for use.
Put the required amount of coffee in the coffee lter Fig. 12.
Close the lter holder compartment until the Release button (12) clicks into place.
Place the glass carafe (17) on the heating plate (18) Fig. 16.
Press the Grind Off button to turn off the grinder. Then, press the Grind and Brew button
for the coffee symbol to appear (E).
After a few seconds, the appliance starts making the coffee.
To interrupt the process, press the Grind and brew button (1).
If the process is completed, the appliance will beep and switch to keep-warm mode.
The cup-of-coffee symbol (E) starts ashing. The appliance can be switched off by
pressing the Grind off button (2) or the appliance switches off automatically after 2 hours.
Setting the coffee quantity
ONLY for «Grind / Brew», NOT applicable for «Grind Off».
The coffee strength selector (7) is used for setting the required coffee strength. The coffee
strength selector (7) can be set to mild coffee (MILD), medium coffee (MEDIUM) and strong
coffee (STRONG).
Setting the coffee strength (B)
ONLY for «Grind / Brew», NOT applicable for «Grind Off».
The coffee strength selector (7) is used for setting the required coffee strength. The coffee
strength selector (7) can be set to mild coffee (MILD), medium coffee (MEDIUM) and strong
coffee (STRONG) Fig. 14.
Note: The appliance can only be used when the display is activated. If the display is not
activated, press any button to activate the display. The appliance is ready for use.
Repeatedly press the coffee strength selector (7) to set the coffee strength. The coffee
strength (B) is shown on the display (8).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Krups KM785D50 and is the answer not in the manual?

Krups KM785D50 Specifications

General IconGeneral
BrandKrups
ModelKM785D50
CategoryCoffee Maker
LanguageEnglish

Related product manuals