English
16
n After 15 minutes, turn the machine back on.
n Let the rest of the water run through until the water tank is empty.
n Then turn the dial to the (h1). position.
RINSING
IMPORTANT!
After descaling, rinse 2-3 times with clean water as des-
cribed in Section 4 “BEFORE FIRST USE”. Then rinse
the steam nozzle by following the instructions below:
n Fill the water tank with clean water. Then place a container under the
steam nozzle.
n Press the “on/off” button to turn the machine on, and then
immediately turn the dial to the (i3) (fig. 13)position, without
stopping at the (i2)position.
n Let the water run through the nozzle until steam appears.
n Turn the dial back to the
O (i1) (fig. 15) position.
The machine is now descaled and ready to be used again.
IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page16
To Next Page
Loading...
Need help?
General
