EasyManuals Logo

Krups XP344C51 User Manual

Krups XP344C51
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
12
PROBLEMS POSSIBLE CAUSES SOLUTIONS
Water is leaking under the
appliance.
There's an internal leak. Check that the tank is tted
correctly. If the leak continues,
do not use the appliance,
contact an approved service
center.
The drip tray has not been
tted correctly.
Check that the drip tray is
pushed to the back of the
appliance.
The drip tray is overowing. Empty and carefully rinse the
drip tray and replace.
The cups have been lled
unequally.
The lter holder is clogged. Please refer to the paragraph
on CLEANING AND
SERVICING for servicing your
lter holder.
The pump is abnormally
hot.
There is no water in the
tank.
Fill the tank with water and
re-initiate the pump (see
paragraph: USING FOR THE
FIRST TIME). Avoid emptying
the tank completely.
The espresso leaks over
the edges of the lter.
The lter holder is not
positioned correctly.
Put the lter holder in place and
lock it (turning it from left to right
as far as it will go).
Remove excessive coffee
grounds that prevent the lter
holder to be locked.
The rim of the lter holder
is encrusted with coffee
grounds.
Remove excessive coffee
grounds and clean the grid
through which water passes
with a damp sponge.
Your espresso tastes bad. The appliance was not
rinsed correctly after
descaling.
Rinse the appliance according
to the instructions and check
the quality of the coffee.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Krups XP344C51 and is the answer not in the manual?

Krups XP344C51 Specifications

General IconGeneral
BrandKrups
ModelXP344C51
CategoryCoffee Maker
LanguageEnglish

Related product manuals