EasyManuals Logo

Krups XP5220 Manual

Krups XP5220
Go to English
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
English
58
DESCALING OF THE STEAM AND COFFEE CIRCUIT
n Empty the tank and put it back in place.
n If your product is equipped with our Claris - Aqua Filter System cartridge F088, please remove this
cartridge before the descaling operation.
n Fill the tank with a mixture composed of three parts water for one part white vinegar or a mixture of ½
litre of water and a packet of citric or sulphamic acid available in the shops.
n Insert the filter holder (without espresso ground coffee) into the appliance and lock it by turning it to
the right as far as it will go.
n Place a container under the steam nozzle.
n Press the “on-off” button.
n Immediately turn the switch to the “steam” position (without stopping at the "steam preheating"
position).
n Let the mixture run through the nozzle until steam appears.
n Turn the switch back to the "stop" position
n Place a container of sufficient volume under the filter holder.
n Once the light stops blinking, turn the switch to the “coffee” position and half of the mixture run through.
n Turn the machine off using the "on off" button and leave the switch on the coffee position.
n After 15 minutes, turn the machine back on.
n Let the rest of the water run through.
n Turn the switch to the “stop” position.
RINSING
IMPORTANT!
After descaling, perform 2-3 rinsing operations with clear water (without espresso
ground coffee), as described in paragraph 5 "using for the first time".
Remember to rinse the steam nozzle by following the instructions below:
n Place a container under the steam nozzle.
n Press the “on-off” button.
n Immediately turn the switch to the “steam” position (without stopping at the “steam preheating”
position).
n Let the water run through the nozzle until steam appears.
n Turn the switch back to the “stop” position.
The appliance is descaled and ready to be used again.
n This product has been designed for domestic use only. Any commercial use, inappropriate use or
failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee
will not apply.
n No repairs will be carried out due to a lack of descaling will be covered by the guarantee.
n If you have any problem or query please contact our Customer Relations Team for expert help and
advice.
Helpline: 0845 602 1454 - UK
(01) 677 4003 - Ireland
or consult our web site: www.krups.co.uk
10. GUARANTEE

Other manuals for Krups XP5220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Krups XP5220 and is the answer not in the manual?

Krups XP5220 Specifications

General IconGeneral
Product typeEspresso machine
Capacity in cups2 cups
Coffee input type-
Water tank capacity1.1 L
Maximum operating pressure15 bar
TypeEspresso
Non-slip feetYes
Product colorBlack, Stainless steel
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth262 mm
Width228.6 mm
Height292 mm
Weight6170 g

Related product manuals