code R30045.110en www.kseniasecurity.com
ed.06/2022
ergo-X
BUS outdoor keypad
User and installer
manual
INTRODUCTION
ergo-X keypad is an access control user interface connected to and powered by the BUS of lares 4.0 control
panel. The keypad case is compliant with IP65 protection degree so that it can be installed outdoors and
does not require additional protection.
ergo-X keypad allows the user to run any type of scenario in the following ways: place your mini-Tag near
RFID reader on the keypad and then press the key that activates the desired scenario; enter your code and
then press a programmed key (with PIN); long press the programmed key (without PIN).
Scenarios and colors of RGB led associated can be remotely customizable from Installer App.
ergo-X keypad has two I/O terminals that can be programmed as inputs with EOL resistors or as Open
Collector outputs up to 500mA each.
TECHNICAL CHARACTERISTICS
• Power supply 13.8 Vdc
• Consumption max 200mA
• Mechanical membrane keypad
•RFID Tag reader
• Automatic backlight keys
• RGB led with customisable colors for system status signalling
• Feedback sound on operations
• Tamper switch anti-removal
• 2 terminals I/O (OC 500 mA max)
• Protection degree IP65 (compliant with EN 60529:1991 /A1:2000 /A2:2013)
• Resistance impact protection IK09 (compliant with EN 62262:2002)
• Temperature range: from -20°C to +55°C
• Mount adapter plate + 2m unshielded cable (8x0.22)
• Dimensions 72 x 113 x 20.5 mm (LxHxW)
• Color: black, light grey
KSI2100031.302 - ergo-X black
KSI2100031.303 - ergo-X grey
To Next Page
Need help?
General
