4.Simple Problems Disposal
Symptoms
I.Blonk screen [Power indicator
does not work
too large or too small images
3.00rk screen
a.Display overheating
5.Dark/Iight spots when powered on
6.1mage distortion, flashing, shaking
7.Noisy signal when powered off
Disposal Methods
Check whether the power supply is in good contact with the
display and the power socket; and check whether the display
is turned off.
Goto the "Image Settings" category menu and select "Image
Auto Adjust" to make the monitor adjust automatically to
correct. (Only available for monitors with VGA)
Enter the "Brightness & Contrast" menu to regulate the
contrast and the brightness of the display.
Leave at least 5cm of ventilated space around the display.
Do not place articles on the display.
It is normal. Because of the temperature difference in the
environment, the backlit tube emits uneven light at the initial
stage after the display turns on. However, the backlit tube will
emit normal light after 20 minutes, and the dark/light spots
will be eliminated at that time.
Check your computer configuration, choose the correct
resolution, and reset your refresh rate.
During the power-off of the display, there may be some noisy
signals on the screen caused by the normal discharge.
5. Product Technical Specifications
Panel Dimension
Best Operating Resolution Ratio
Input Voltage
Contrast
Visible Area
Pixel Pitch
Pitch size for wall mount
Maximum elevation
Working condition
Atmosphere
Temperature
Humidity
Pocking Dimension (WxHxD) and Weight
Display Dimension (WxHxD) (excluding base)
Packing Dimension (WxHxD)
Net Weight of Display (including base)
packing weight
26.5"
2560x1440 @ 240Hz
DC 241,' /
1500000 :1
586.75mm x 330.05mm
0.2292mm x 0.2292mm
75mm x 75mm
5000m
86kPo
oc —40 c
-20c 55 c
604.4x350.6x52.3mm
860x215x490mm
5.2Kg
10.2Kg
A' 900/0 (Non-condensing)
(Non-condensing)
To Next Page
Loading...