Need help?Do you have a question about the KTM Power Parts TANK BAG and is the answer not in the manual?
General| Brand | KTM Power Parts |
|---|---|
| Model | TANK BAG |
| Category | Motorcycle Accessories |
| Language | English |
Includes removing screws, mounting spacers, positioning the tank ring, and tightening screws to 6 Nm.
Drill mounting holes using the template and a drill bit, placing a wooden block on the opposite side.
Position the upper ring, mount screws from inside (3 Nm), and close the textile cover with Velcro.
Attach the pull cord, push the tank backpack onto the ring until it snaps, and verify seating.
Instructions on how to detach the tank backpack by pulling the strap.
Maximum load of the tank backpack is 3 kg; adhere to vehicle load limits and maximum speed of 130 km/h.
Check all connections for tightness after the first 50 km.
Use warm soapy water, soft cloth, and soft brush for zippers. Avoid harsh cleaners.
Stiff zippers can be loosened using talcum powder.
Textile materials may fade or change color with prolonged intense sunlight exposure.
To Next Page
