KTM 125 XC-W EU 2017 - 4 TECHNICAL DATA; 4.1 chassis tightening torques

To Next Page

To Previous Page

4 TECHNICAL DATA 30

4.1 chassis tightening torques

Screw, fixed grip M4 5 Nm (3.7 lbf ft) Loctite

243™

Spoke nipple, front wheel M4.5 6 Nm (4.4 lbf ft) –

Spoke nipple, rear wheel M4.5 6 Nm (4.4 lbf ft) –

Remaining nuts, chassis M5 5 Nm (3.7 lbf ft) –

Remaining screws, chassis M5 5 Nm (3.7 lbf ft) –

Screw, battery terminal (All 250/300

models, XC‑W US, XC‑W Six Days US)

M5 2.5 Nm (1.84 lbf ft) –

Screw, light switch (all

EXC/EXC Six Days models, 125 XC‑W)

M5 1 Nm (0.7 lbf ft) –

Screw, shock absorber adjusting ring M5 5 Nm (3.7 lbf ft) –

Nut, cable on starter motor (All

250/300 models, XC‑W US,

XC‑W Six Days US)

M6 4 Nm (3 lbf ft) –

Remaining nuts, chassis M6 10 Nm (7.4 lbf ft) –

Remaining screws, chassis M6 10 Nm (7.4 lbf ft) –

Screw, ball joint of push rod on foot

brake cylinder

M6 10 Nm (7.4 lbf ft) Loctite

243™

Screw, chain sliding guard M6 6 Nm (4.4 lbf ft) Loctite

243™

Screw, front brake disc M6 14 Nm (10.3 lbf ft) Loctite

243™

Screw, rear brake disc M6 14 Nm (10.3 lbf ft) Loctite

243™

Screw, throttle grip M6 5 Nm (3.7 lbf ft) –

Nut, foot brake lever stop M8 20 Nm (14.8 lbf ft) –

Nut, rear sprocket screw M8 35 Nm (25.8 lbf ft) Loctite

2701™

Nut, rim lock M8 12 Nm (8.9 lbf ft) –

Remaining nuts, chassis M8 25 Nm (18.4 lbf ft) –

Remaining screws, chassis M8 25 Nm (18.4 lbf ft) –

Screw, bottom triple clamp (All stan-

dard EXC/XC-W models)

M8 15 Nm (11.1 lbf ft) –

Screw, bottom triple clamp (All

Six Days models)

M8 15 Nm (11.1 lbf ft) –

Screw, chain sliding piece M8 15 Nm (11.1 lbf ft) –

Screw, engine brace M8 25 Nm (18.4 lbf ft) Loctite

2701™

Screw, fork stub M8 15 Nm (11.1 lbf ft) –

Screw, front brake caliper M8 25 Nm (18.4 lbf ft) Loctite

243™

Screw, handlebar clamp M8 20 Nm (14.8 lbf ft) –

Screw, side stand attachment M8 35 Nm (25.8 lbf ft) Loctite

2701™

Screw, subframe M8 35 Nm (25.8 lbf ft) Loctite

2701™

Screw, top steering stem (All stan-

dard EXC/XC-W models)

M8 20 Nm (14.8 lbf ft) –

Screw, top steering stem (All Six Days

models)

M8 17 Nm (12.5 lbf ft) Loctite

243™

Screw, top triple clamp (All

standard EXC/XC-W models)

M8 20 Nm (14.8 lbf ft) –

Screw, top triple clamp (All Six Days

models)

M8 17 Nm (12.5 lbf ft) –

Engine bracket screw M10 60 Nm (44.3 lbf ft) –

Remaining nuts, chassis M10 45 Nm (33.2 lbf ft) –

Remaining screws, chassis M10 45 Nm (33.2 lbf ft) –

Screw, handlebar support M10 40 Nm (29.5 lbf ft) Loctite

243™

Screw, bottom shock absorber M12 80 Nm (59 lbf ft) Loctite

2701™

Screw, top shock absorber M12 80 Nm (59 lbf ft) Loctite

2701™

Nut, seat fixing M12x1 20 Nm (14.8 lbf ft) –

Nut, swingarm pivot M16x1.5 100 Nm (73.8 lbf ft) –

Main Page

KTM 125 XC-W EU 2017 - 4 TECHNICAL DATA; 4.1 chassis tightening torques

Table of Contents

Related product manuals