7 COMBINATION INSTRUMENT
122
7.28.33 Daytime Runn. Light
S03823-01
Condition
• The motorcycle is stationary.
– Press the RIGHT button when the menu is closed.
– Press the UP or DOWN button until Settings is marked.
Press the RIGHT button to open the menu.
Warning
Danger of accidents When visibility is poor, the day-
time running light is not a substitute for the low beam.
Automatic switching between the daytime running
light and low beam may only be partially available
when visibility is significantly impaired due to fog,
snow or rain.
– Ensure that the appropriate type of lighting is
always selected.
– If necessary switch off the daytime running lights
using the menu before going on a ride or when
stopped so that the low beam is switched on per-
manently.
– Note the legal regulations regarding the daytime
running light.
To Next Page
Loading...
