ERGONOMICS 8
151
S04091-10
– Position the shift linkage at one of the upper positions of the
shift shaft.
Guideline
Outer position Shift power low, long shift
path
Inner position Shift power high, short shift
path
Info
When the footrest support is returned to the standard
position, one of the lower positions on the shift shaft
must be used.
–
Mount and tighten screw
3
.
Guideline
Screw, shift rod M6 5 Nm (3.7 lbf ft)
Loctite
®
243™
Info
The switching scheme is now reversed.
To Next Page
Loading...
