SERVICE WORK ON THE CHASSIS 13
199
13.1 Lifting the motorcycle with the rear lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
E00695-01
– Place the adapter into the rear lifting gear.
Rear wheel work stand for single-sided swing arm
(61329955000)
– Position the motorcycle upright, place the lifting gear in the
axle, and raise the motorcycle.
13.2 Removing the rear of motorcycle from the lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
To Next Page
Loading...
