BRAKE SYSTEM 14
233
14.1 Anti-lock braking system (ABS)
H01998-10
The ABS unit
1
, which consists of a hydraulic unit, ABS control
unit, and return pump, is installed on the right vehicle side below
the fuel tank. One wheel speed sensor
2
is located in each case
on the front and the rear wheel.
Warning
Danger of accidents Changes to the vehicle impair the
function of the ABS.
– Only allow the rear wheel to spin with the front brake
applied away from public road traffic if the ABS is
switched off.
–
Do not make any changes to the suspension travel.
– Only use spare parts on the brake system which have
been approved and recommended by KTM.
– Only use tires/wheels approved by KTM with the corre-
sponding speed index.
– Maintain specified tire pressure.
– Ensure that service work and repairs are performed
professionally. (Your authorized KTM workshop will be
glad to help.)
The ABS is a safety system that, within physical limitations, can
prevent locking and slipping of the wheels during braking.
To Next Page
Loading...
