ELECTRICAL SYSTEM 16
275
Tip
Insert a spare fuse so that it is available if needed.
– Check that the power consumer is functioning properly.
–
Close the fuse box cover
1
.
Finishing work
– Mount the front rider's seat. ( p. 210)
– Mount the passenger seat. ( p. 208)
16.8 Changing the turn signal bulb
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
– Clean and degrease the bulbs before mounting.
– Do not touch the bulbs with your bare hands.
To Next Page
Loading...
